-1 C
New York
Saturday, January 4, 2025

Why can I hit my irons but not my driver?


Hitting the driver well is one of the biggest challenges many golfers face. Even if your handcuffs are on the phone, the driver often lags behind because it requires some adjustments to the setup and swing. If you can hit your irons but not your driver, try making these changes.

Low-scoring mismanagement

When you hit an iron shot, you want the low point of the swing to be straight AFTER the golf ball. This allows you to hit the ball first and then get your shot. With the driver, you want the low point to be straight BEHIND the ball so you hit it on the rise.

If your driver loss includes sky marks on your club head or large fairways, it could be due to low-level mishandling.

Quick fix: Move the ball forward into your stance and play it only from your leading heel. Keep your chest slightly behind the ball at address. You will feel like the club reaches the bottom of the arc just before impact.

The swing path is too steep

Many amateur golfers have a swing path that is too steep. While you can get away with a steeper path when hitting an iron, there is no room for error when you have the driver in your hands.

A steep or down angle of attack is likely to leave you hitting a piece, pulling it, and sometimes even divoting when you hit a car.

Quick fix: Feel a shallower recoil. Use a stretching stick on the ground behind you to make sure your pickups are on track. You can also try this drill from Clay Ballard which helps exaggerate the feeling of a shallow swing.

Incorrect mast height

Not just one Incorrect maw height costs you a bityou will also notice inconsistencies in your ball strike. The driver faces big and if you land the ball too low, it can induce a drop shot. Lifting the ball too high can cause you to shoot out of the sky from the crown of the driver.

If your drives look like line drives or low hooks or you have marks on the top of the driver’s head, check the height of your mouse.

Quick fix: You like that half of the ball rests on top driver’s crown at the address. Adjust it a little higher or lower if you see persistent signs of low or high impact on the face.

Absence of spine tilt

To drive an upward swing on the golf ball, you need a little more spine tilt with the driver than with the irons. Barbells can work with a neutral spine angle. With a driver, the shoulder of the track should be lower than the shoulder of the lead at address.

If you’re hitting the ball, missing distance or cutting, make sure the spine tilt at address is correct.

Quick fix: Place your shoulder slightly higher at address; feel your head behind the ball at impact.

Faulty loft or driver shaft

If your loft or shaft bend doesn’t match your swing, you won’t get proper ball flight and launch. If you are playing with the wrong shaft, you will likely have trouble getting the ball flight too low or too high. You may also notice large losses to the left or right of the target.

Some golfers may even feel that the shaft is too stiff or sharp.

Quick fix: Take one professional driver assembly. Despite all the testing we do and the data we generate about driver performance, we still recommend that you get fitted for a club that meets your specific needs. Proper loft and shaft flex can significantly improve launch, spin, and stability.

The lead arm rises and rises very high

For players who tend to use their arms more than their body in the swing, the arm of the lead can be too high, causing a wrong path. If you’re having trouble getting your arm up too much, you probably think your driver is more of a “slash” swing. You can hit slices and big fades.

Any independent lift of the arms in the backstroke without rotation of the shoulders and body makes it difficult to hit a great car.

Quick fix: Let your shoulder and lower body rotate so the club travels more around you. The lead arm will not be straight up and down. Of course, you can overdo this concept and start taking the driver too shallow. This video gives a great stretching workout and a visual of what it should all look like.

Putting it all together

Now that we’ve covered all the main reasons why you’re hitting the irons well but not your driver, here’s a basic summary:

  • The irons are designed for a downward stroke. The driver must be hit on a level road or slightly above.
  • Keep the ball forward position. Use a top that gives you enough height to hit the center of your face.
  • Look The best golf driver testing we did and then tailored a club that matches your needs.
  • When practicing on the range, use the alignment sticks to check your swing plane and make sure you’re on track.

Post Why can I hit my irons but not my driver? appeared first on MyGolfSpy.



Source link

Related Articles

LEAVE A REPLY

Please enter your comment!
Please enter your name here

- Advertisement -
- Advertisement -

Latest Articles

- Advertisement -
- Advertisement -